Flags, Custom Flags, Flag Poles, Flagpole Parts, Flag Pole Lighting, Commercial Flagpoles, American Flags, Made in The United States

 
Click here to go home
 
Welcome Guest
View Shopping Cart



Call us toll-free at 800-385-5605

E-Mail Us!

Customer Comments
Read what our satisfied customers have said...
Customer Comments


Visit our sister company, Eagle Mountain Knife
Visit our sister company,
Eagle Mountain Knife
Professional Cutlery

Flagpole Installation Guide



Shoebase Mount Installation



Shoebase mount flagpoles are used primarily where embedded type mounts cannot be used, as over an underground garage; or where electrical wiring for illumination or hazard lights is to be introduced into the shaft.

Anchor base is cast from A356 alloy aluminum, the shoebase shall be heat-treated to a T-6 condition. The shaft shall be inserted into the shoebase casting, and casting and shaft shall be joined by a continuous circumferential weld at the outside top and inside bottom of the shoebase. Shoebase mounting is available on most shafts with a base diameter of 4" to 10".

Flagpole Shoe Base
Base mounting is not recommended except for roof tops and parking garages

Ground Mounted Installation

(for Independence, Continental, and Sentry flag poles)

(Estate & Fiberglass Flagpoles Use a Mounting Tube)

The embedded, or groundset, mount is the method of choice for mounting aluminum flagpoles at grade. Flagpole shafts so mounted have a higher wind speed rating than the same shafts base plate mounted.

Foundation tube is fabricated from 16 ga. galvanized steel, with a steel base plate whose square dimension is at least the i.d. of the sleeve plus 4". A setting plate 6" square shall be securely welded to the ground spike at least 6" below the base plate. The ground spike shall be 3/4" diameter, not less than 18" long.


Shaft foundation dimensions recommended minimums for good, firm, dry soil only.

Height Butt Dia Sleeve Dia Depth A Top B Bottom C
20' 4" 6" 3' 6" 30" 24"
20' 5" 8" 3' 6" 30" 24"
25' 5" 8" 3' 6" 30" 24"
25' 5.5 - 6" 10" 3' 6" 30" 24"
30' 5" 8" 3' 6" 30" 24'
30' 6" 10" 3' 6" 30" 24"
35' 5" 8" 4' 0" 36" 30"
35' 6 - 7" 10" 4' 0" 36" 30"
40' 7" 10" 4' 6" 42" 36"
40' 8" 12" 4' 6" 42" 36"
45' 8" 12" 5' 0" 48" 42"
50' 8" 12" 5' 6" 48" 42"
50' 10" 15" 5' 6" 48" 42"
60 10 - 12" 15" 6' 10" 48" 42"
70' 10 - 12" 15" 8' 0" 60" 48"
80' 12" 15" 9' 0" 60" 48"


 
   
GSA Contract Holder